Discover new paths.

Achieve the extraordinary.

SmartSaver

Revolution for air conditioning, cooling and deep freezing.

Thanks to these impressive findings from materials science and surface chemistry, your refrigeration technology can now do something that wasn’t feasible before.

YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

Humidity control changes everything: SmartSaver are molecular filters in the air flow of chilled environments. They work without electrical components and balance the humidity in a continuous process. As a result, they lower your operating costs for refrigeration technology and improve your CO2 emissions.​​

hintergrund-hexagramm4

Humidity control changes everything: SmartSaver are molecular filters in the air flow of chilled environments. They work without electrical components and balance the humidity in a continuous process. As a result, they lower your operating costs for refrigeration technology and improve your CO2 emissions.​​

In the public focus: “Customers and investors expect strategies for sustainability and climate protection.” (Larry Fink, CEO Blackrock)

Well proven: after installation in your chilled environment, you achieve average, you will reduce your operating costs by avoiding load peaks and the resulting operating interruptions. At the same time, the cooling capacity is increased and defrost cycles can be reduced. Working hours that were previously used to remove snow and ice can now be leveraged in your added value.

No ice formation on products, devices and surfaces. Less maintenance. Less wear and tear. Lower CO2 emissions. Longer lifetime.

Every question is a step forward. Let’s talk today and dare the revolution for air conditioning, refrigeration and freezing together with CNT Technology.

Philipp Draß – Business Development

Like a filter.
Unlike any filter.

Unobtrusive and highly effective: They consist of an elaborately processed mineral composition, that completely changes the cooling process. It does not only adsorb humidity of the bypassing air, but also releases it in a dosed manner. It’s completely self-sufficient due to pressure and temperature differences.

The minerals used in the SmartSaver are characterized by the fact that they only filter water molecules out of the air flow in the cooling process. They adsorb humidity when it’s high in the environment and release it when it’s low.

This minimizes the dehumidification effort as well as the energy consumption and avoids peak loads. The cooling process runs more evenly and therefore much more efficiently.

Like a filter.
Unlike any filter.

Unobtrusive and highly effective: They consist of an elaborately processed mineral composition, that completely changes the cooling process. It does not only adsorb humidity of the bypassing air, but also releases it in a dosed manner. It’s completely self-sufficient due to pressure and temperature differences.

The minerals used in the SmartSaver are characterized by the fact that they only filter water molecules out of the air flow in the cooling process. They adsorb humidity when it’s high in the environment and release it when it’s low.

This minimizes the dehumidification effort as well as the energy consumption and avoids peak loads. The cooling process runs more evenly and therefore much more efficiently.

One after another is better than simultaneously.

Adsorption instead of condensation: With conventional refrigeration technology, the dehumidification effort by condensation can account for up to 50% of the entire energy consumption. SmartSaver passively control the humidity level and therefore prevent load peaks. First cool efficiently and then dehumidify efficiently.

Due to its characteristics the minerals act as a molecular sieve and can only take up water molecules due to pressure differences. When moisture is added to the chilled environment, for example through door openings, the pressure of the water vapor and the adsorption increases until the pressure is balanced. Excess humidity, which otherwise would lead to condensation and ice formation, is removed from the cooling process.

In the course of cooling, the pressure of the water vapor in the environment drops, so that desorption starts due to a new pressure difference. The previously adsorbed humidity is slowly released back into the circuit and efficiently removed via the evaporator.

These constant pressure changes prevent load peaks in the cooling process and lead to a permanently lower dew point. This largely prevents condensation and ice formation and makes the cooling process significantly more efficient.

One after another is better than simultaneously.

Adsorption instead of condensation: With conventional refrigeration technology, the dehumidification effort by condensation can account for up to 50% of the entire energy consumption. SmartSaver passively control the humidity level and therefore prevent load peaks. First cool efficiently and then dehumidify efficiently.

Due to its characteristics the minerals act as a molecular sieve and can only take up water molecules due to pressure differences. When moisture is added to the chilled environment, for example through door openings, the pressure of the water vapor and the adsorption increases until the pressure is balanced. Excess humidity, which otherwise would lead to condensation and ice formation, is removed from the cooling process.

In the course of cooling, the pressure of the water vapor in the environment drops, so that desorption starts due to a new pressure difference. The previously adsorbed humidity is slowly released back into the circuit and efficiently removed via the evaporator.

These constant pressure changes prevent load peaks in the cooling process and lead to a permanently lower dew point. This largely prevents condensation and ice formation and makes the cooling process significantly more efficient.

Ecologically and
economically worthwhile.

Appear progressive: Using SmartSaver technology not only strengthens your public brand perception and market position, but also your company growth. A balanced cooling process leads to an improved CO2 balance through energy savings, and the amortization often takes place within a year.

Economic experts agree: Today’s growth rates of companies are inextricably linked to its ability to operate sustainably as well as to use resources efficiently and with foresight.

In Germany alone, according to VDMA, 71 TWh of electricity is used for refrigeration, causing 33,650,000 tons of CO2 emissions. Yearly. By using the SmartSaver, you not only optimize your operating result due to significant reduction of running expenses, but also make a valuable contribution to a future-proof society.

Ecologically and
economically worthwhile.

Appear progressive: Using SmartSaver technology not only strengthens your public brand perception and market position, but also your company growth. A balanced cooling process leads to an improved CO2 balance through energy savings, and the amortization often takes place within a year.

Economic experts agree: Today’s growth rates of companies are inextricably linked to its ability to operate sustainably as well as to use resources efficiently and with foresight.

In Germany alone, according to VDMA, 71 TWh of electricity is used for refrigeration, causing 33,650,000 tons of CO2 emissions. Yearly. By using the SmartSaver, you not only optimize your operating result due to significant reduction of running expenses, but also make a valuable contribution to a future-proof society.

Fields of application
Benefit from the advantages of SmartSaver in the entire chain of cooling from production, transport, cold storage, deep-freeze storage to refrigerated cabinets and in commercial air conditioning.

Slide 1

Cold and freezer room.

Directly in the inlet air flow to the evaporator: as easy to install as hanging a picture on the wall.

Slide 1 - copy

Cooling & freezer cabinets.

Suits best for closed devices: almost invisibly installed and yet highly effective.

Slide 1 - copy - copy

Air conditioning.

Suitable for most ceiling cassettes: installed invisibly directly behind the air filter in the supply air flow.

previous arrow
next arrow

For you, more SmartSaver means:
Less relative humidity. Less condensate. Less microbes, mold and odor. Less defrosting times and less operating costs. Less maintenance and longer use. More stable temperatures that lead to higher quality and longer shelf life of the stored products.

Novel and yet long-established
SmartSaver is responsible for a significant reduction in operating costs while at the same time improving quality and also helping to protect the environment. Strong partners from food retail such as EDEKA, REWE and KAUFLAND as well as from system gastronomy such as Burger King and McDonalds have already recognised the potential and modernised cooling processes. Follow these examples.

SmartSaver permanently changes cooling and air conditioning. Your company can be part of this next big step, which is so amazingly simple. Do you want to tryout? We are looking forward to your contact.